Wondering how the Revolt underquilt suspension system works? Check out the video or read on below for everything you need to know!
At each corner of the underquilt, the side-channel suspension cord comes out of the quilt and through a Line-Lock. Between the side-channel and the Line-Lock, a small plastic Mitten Clip can be used to attach to the hammock suspension. If you prefer, you can also use a Mini Carabiner to attach both left and right sides of the underquilt at the same time.
Pull the end of the shock cord to suspend higher or lower. Repeat the same on the other end of the underquilt, positioning roughly where your body needs insulation.
There’s a shock cord running the width, with a small cord-lock on the end. Cinch these down as needed to lock out any draftiness at the ends of the underquilt.
Once inside the hammock, by simply adjusting the long cords, the fit and suspension can be tuned to your preference.
