All of our down quilts have a box baffle system that channels the down to allow even distribution for the best loft and most warmth. Box baffles use internal baffle walls made of a mesh material that keeps the down in a smaller area to mitigate migration.
However, the down will shift as you use the quilt, especially if you pack it in a tight stuff sack. When the down shifts, it may clump and create cold spots, which decreases the quilt's ability to keep you warm overall. To help avoid this, here are some tricks to move the down back to where it is needed.
The simplest way move down is to lightly shake your sleep system from the foot end. This will move the down up and down the vertical portions of the baffles. Just be careful not to shake the quilt too vigorously as you could damage the quilt.
For even better distribution, lay your quilt out on a flat surface and gently move your hand over the baffles. When you're doing this, you're actually moving the air and not the down itself. You brush your hand over the sleep system, which moves the air in the baffles which in turn moves the down. So the lighter you brush, the more effective you will be at moving the down. This method is especially helpful for moving down that gets stuck at the top of baffles or around corners. You may have to move your hand over a single area several times to move the full amount that you need to.
In some cases, your down may clump in one area, such as a corner. The best way to handle this is to work the specific area by either gently massaging the down clusters or by lightly smacking and pushing the area.
You also can put your sleep system in the dryer on the NO HEAT setting with a few tennis balls. Using tennis balls helps break up the down clusters and move the down around. You will need to redistribute with your hands as well after drying.
If none of these approaches work, it could be that dirt, moisture, or oil buildup is affecting the down's ability to loft. Read how to wash your quilt.